Super-systems e-TRIM Bedienungsanleitung

e-TRIM OPERATIONS MANUAL Super Systems Inc. 7205 Edington Drive Shipping Address: 7245 Edington Drive Cincinnati, OH 45249 513-772-0060 Fax: 513

Super Systems Inc. Page 10 of 27 e-TRIM Operations Manual alarm and critical alarm information. The default setting is master

Super Systems Inc. Page 11 of 27 e-TRIM Operations Manual The user will have to select the board to modify from the “Select B

Super Systems Inc. Page 12 of 27 e-TRIM Operations Manual Alarm Enabled This setting will modify whether the selected burner’

Super Systems Inc. Page 13 of 27 e-TRIM Operations Manual and press OK. Note that Editable Zones must be configured in the Sys

Super Systems Inc. Page 14 of 27 e-TRIM Operations Manual Chart NOTE: This manual was written with oxygen readings from th

Super Systems Inc. Page 15 of 27 e-TRIM Operations Manual The button on the left - - is the Trend Lines button. This butto

Super Systems Inc. Page 16 of 27 e-TRIM Operations Manual - will move the chart display back in the past by half of the displ

Super Systems Inc. Page 17 of 27 e-TRIM Operations Manual Chart Sub Menu There is a sub-menu available by putting a finger or

Super Systems Inc. Page 18 of 27 e-TRIM Operations Manual Warranty Limited Warranty for Super Systems Products: The Limited

Super Systems Inc. Page 19 of 27 e-TRIM Operations Manual Appendix A – e-TRIM Modbus Registers The following list is a descri

Super Systems Inc. Page 2 of 27 e-TRIM Operations Manual Super Systems Inc. USA Office Corporate Headquarters: 7205 Edington

Super Systems Inc. Page 20 of 27 e-TRIM Operations Manual 648 - 653 Timers for sensor 9 654 - 659 Timers for sensor 10 660 -

Super Systems Inc. Page 21 of 27 e-TRIM Operations Manual Appendix B – Spare Parts List The following is a list of spare part

Super Systems Inc. Page 22 of 27 e-TRIM Operations Manual Appendix C – Electrical Drawings (For Reference ONLY)

Super Systems Inc. Page 23 of 27 e-TRIM Operations Manual

Super Systems Inc. Page 24 of 27 e-TRIM Operations Manual Appendix D – Typical Installations Based on Application The follow

Super Systems Inc. Page 25 of 27 e-TRIM Operations Manual Typical Setup of e-TRIM with Continuous Furnace Typical Continuo

Super Systems Inc. Page 26 of 27 e-TRIM Operations Manual Example Setup of e-TRIM in a Custom Installation Example Custom I

Super Systems Inc. Page 27 of 27 e-TRIM Operations Manual Revision History Rev. Description Date MCO # - Initial Release 6/

Super Systems Inc. Page 3 of 27 e-TRIM Operations Manual Table of Contents E-TRIM OVERVIEW ...

Super Systems Inc. Page 4 of 27 e-TRIM Operations Manual e-TRIM Overview e-TRIM is designed to be installed on indirect fire

Super Systems Inc. Page 5 of 27 e-TRIM Operations Manual e-TRIM Touchscreen Interface Main Screen NOTE: This manual was wri

Super Systems Inc. Page 6 of 27 e-TRIM Operations Manual Details NOTE: This manual was written with oxygen readings from th

Super Systems Inc. Page 7 of 27 e-TRIM Operations Manual e-TRIM Menu NOTE: This manual was written with oxygen readings from

Super Systems Inc. Page 8 of 27 e-TRIM Operations Manual This screen will display: Click the Offset= button to enter the off

Super Systems Inc. Page 9 of 27 e-TRIM Operations Manual The O2 Boards are the active circuit boards that are obtaining the ox