Super-systems SuperDATA Bedienungsanleitung PDF herunterladen (Seite 20)

Super Systems Inc Page 20 of 172 Super Data Operations Manual

MOD_ET2600 note 1.

Note 1. Configured the same as Generic Modbus.

Generic MODBUS Instruments

MOD_PMC note 1

MMI_MOD note 2

Note 1. This protocol uses Modbus FN 03 to read registers and FN 6 or FN 16 to write registers. Values to

be polled are specified in the instrument configuration line.

Note 2. This protocol uses Modbus FN 04 to read registers and FN 6 or FN 16 to write registers. Values to

be polled are specified in the instrument configuration line.

Honeywell Instruments

Generic Honeywell CPL Instrument

CPL_HW note1.

Note 1. The only instrument tested using this protocol is the Honeywell DCP550. . Values to be polled are

specified in the instrument configuration line.

Honeywell Modbus Instruments

HWM_DPR3000 note 1

HWM_GEN note 2

HWM_DPR100 note 2

HWM_DPR180 note 2

HWM_DPR250 note 2

HWM_RSX note 2

HWM_VRX note 2

HWM_VPR note 2

HWM_DR4300 note 2

HWM_DR4500 note 2

HWM_UDC2300 note 2

HWM_UDC3300 note 2

HWM_UDC5300 note 2

Note 1. Supports READ only using Modbus FN 04. Data inputs are read in register pairs, one register for the

mantissa and one for the decimal indicator. Data inputs are converted to integer with implied decimal

location for SuperData. Inputs to be read are selected in the instrument configuration line.

Note 2. Generic Instrument for Honeywell Modbus using Modbus FN 03 For reading data . Data is read as

either Integer single registers or Floating-point as register pairs, each pair representing an IEEE floating

point number. Data inputs are converted to integer with implied decimal location for SuperData. Data to be

read are selected in the instrument configuration line.

Generic MODBUS Instruments

Honeywell instruments may be configured as Generic Modbus instruments. In this case, only integer data is

supported.

MOD_PMC note 1

MMI_MOD note 2

Note 1. This protocol uses Modbus FN 03 to read registers and FN 6 or FN 16 to write registers. Values to

be polled are specified in the instrument configuration line.

Note 2. This protocol uses Modbus FN 04 to read registers and FN 6 or FN 16 to write registers. Values to

be polled are specified in the instrument configuration line.

Yokogawa Instruments

Yokogawa CPL Instruments

CPL_YOK note 1

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 171 172

Kommentare zu diesen Handbüchern

Keine Kommentare

Super-systems SuperDATA Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Super-systems SuperDATA